Home > Exercises > Back > Lat-Trap-Rhom-Teres > Yates Row
Yates Row
Start PositionEnd Position Starting position:
- Grasp the barbell with a closed, supinated grip.
- Grip width should be wider than shoulder width.
Lifting bar from the floor:
- Lift the bar off of the floor by extending hips and knees.
- Keep the torso-to-floor angle constant.
- Do not lets the hips rise before the shoulders.
- Maintain the back in a flat position to stabilize the lower back throughout the entire movement.
- As the bar is lifted off the ground, keep it as close to your shins as possible.
Starting position:
- Bend slightly at the knees and slightly flex the torso forward.
- Keep the elbows fully extended (with a slight bend in them) allowing the bar to hang in front of the upper thighs.
- Keep your head in a neutral position, looking straight ahead.
Upward movement/concentric phase:
- Pull the bar upward toward your abdomen.
- Maintain the torso in a rigid position with the back flat and knees slightly bent.
Downward movement/eccentric phase:
- In a controlled fashion, slowly lower the bar by allowing the elbows to extend back the to the starting position.
- After the set is complete, place the bar on the floor.
Do not hold your breath. Exhale during the concentric/phase phase and inhale during the eccentric/lowering phase.
Exercise Data
Primary Muscles: Latissimus dorsi, middle trapezius, upper trapezius, rhomboids, teres major Synergists: Posterior deltoid, biceps brachii, brachialisStabilizers: Quadratus lumborum, iliocostalis, longissimus, spinalis, semispinalis, biceps femoris, rectus abdominis, external oblique, internal oblique, transverse abdominis, hamstrings, quadriceps, wrist flexors, rotator cuff musclesType: Strength, hypertrophy, muscular enduranceMechanics: Scapular retraction, shoulder extension, scapular elevation, and elbow flexionEquipment: BarbellLever: 1st class leverLevel: Intermediate to advancedFAQ'S & FACTS ABOUT Yates Row
A Yates row is a compound resistance exercise, which targets the upper and middle back including the latissimus dorsi, middle and upper trapezius, rhomboids and teres major. This exercise can be performed with an Olympic bar or other barbell alternative. It is performed standing with the torso in a slightly flexed position. It is similar to the barbell underhand bent-over row except the torso is more upright as opposed to almost parallel with the floor.
The concentric portion of the lift is scapular retraction, shoulder extension, scapular elevation, and elbow flexion. The eccentric portion is scapular protraction, shoulder flexion, scapular depression, and elbow extension as the bar is lowered.
The purpose of the Yates row is to strengthen the latissimus dorsi, middle and upper trapezius, rhomboids and teres major while also promoting the hypertrophy (increases in size) of these muscles.
Named after famous bodybuilder, Dorian Yates, Yates rows strengthen and develop the muscles of the upper and middle back. Compared to the barbell bent-over row, this exercise requires less stabilization from the back muscles, abdominals, and legs. Therefore, the Yates row allows the lifter to place grater isolation on the latissimus dorsi, middle and upper trapezius, rhomboids, and teres major as the scapula retracts and elevates.
The upright position may be suitable for lifters seeking to perform the row while omitting or delaying the lower back fatigue experienced with the barbell bent-over row. The upright position also activates the upper trapezius as the scapula elevate while they retract. On the other hand, the upright position decreases the range of motion followed through in a barbell bent-over row.
The supinated grip increases the activation of the latissimus dorsi and the biceps brachii compared to performing it with a pronated/overhand grip.
In addition to serving as an exercise that enhances the aesthetics of the upper and middle back, Yates rows also complement weightlifting performance.
The latissimus dorsi is a broad, flat, and triangular-shaped muscle of the lower back. When defined, the “lats” form a “v” shape of the torso as they angle toward the waist. The latissimus dorsi is a primary shoulder adductor and shoulder extensor. In this exercise the latissimus dorsi is responsible for extending the shoulder as the bar is lifted upward. Its origin is located along the spines of the lower six thoracic vertebrae, lower 3 to 4 ribs, and iliac crest of the pelvis. Its insertion spirals around the teres major as it inserts into the intertubercular groove of the humerus.
A flat and triangular muscle, the trapezius is the most superficial muscle of the posterior thorax. The middle fibers run horizontally to the scapula. The upper fibers run downward from the skull toward the scapula. Its origin is located at the occipital bone, ligamentum nuchae, and spines of C7 and all thoracic vertebrae. Its insertion is located along the acromion and spine of the scapula and lateral region of the clavicle. The middle trapezius retracts the scapula. The upper fibers elevate the scapula as when shrugging the shoulders. As a superficial muscle, developing the middle and upper trapezius contributes to the overall aesthetics of the upper back. When well developed, the upper trapezius can be seen on the front of the body above the collar bone.
The rhomboids are two rectangular muscles that lie underneath the trapezius just below the levator scapulae. The rhomboids consist of the rhomboid minor and rhomboid major. The rhomboid minor is located above the rhomboid major and is more superficial. The origin of the rhomboid minor is located at the spinous processes of C7 and T1. The origin of the rhomboid major is located at the spinous processes of T2-T5. The insertion of both rhomboids major and minor is located at the medial border of the scapula. The rhomboids are synergists with the middle trapezius when retracting the scapula.
The teres major is a thick muscle located underneath the teres minor. It helps to form the posterior wall of the axilla. A synergist of the latissimus dorsi, the teres major extends the shoulder in this exercise. Its origin is located at the posterior surface of the scapula at the inferior angle. Its insertion is located at the crest of the lesser tubercle on the anterior humerus (its tendon fused with that of the latissimus dorsi).
The deltoid is a thick, multipennate muscle that forms a curtain around the shoulder. It is the primary muscle involved with arm abduction. When developed, the deltoids give the shoulder their round shape. The extension of the shoulder joint as the barbell is lifted activates the posterior fibers of the deltoid. The origin of the deltoid is located at the insertion of the trapezius, lateral third of the clavicle and the acromion spine of the scapula. Its insertion is located at the deltoid tuberosity of the humerus.
The biceps brachii consists of two heads, the long head and the short head. The long head tendon helps stabilize the shoulder joint and its origin is located at the tubercle and lip of the glenoid cavity of the scapula (shoulder blade). The short head origin is located at the coracoid process of the scapula (shoulder blade). The long and short head unite as the muscle bellies run down the front of the arm. Both heads merge, sharing insertion into the radial tuberosity of the elbow joint. The biceps brachii supinates the wrists while the elbow joint flexes as the barbell is lifted upward.
The brachialis lies underneath the biceps brachii, originating at the front of the lower end of the humerus bone. Its insertion is located at the coronoid process of the ulna at the elbow joint. The brachialis is a primary elbow flexor.
The quadratus lumborum, iliocostalis, longissimus, spinalis, and semispinalis play an essential role in stabilizing the neck and upper and lower regions of the back during this exercise as the torso is in a slightly flexed position.
The abdominal muscles, rectus abdominis, external oblique and internal oblique also play an important role in stabilizing the torso.
The hamstrings (i.e. biceps femoris, semitendinosus, semimembranosus) and quadriceps femoris (i.e. rectus femoris, vastus lateralis, vastus intermedius, vastus medialis) assist in stabilizing the torso from the lower extremity.
The rotator cuff muscles help stabilize the shoulder joint as the scapular retract and elevate while the shoulder extends. The wrist flexors maintain the wrists rigid and stabilized throughout the exercise.
Barbell bent-over row, barbell underhand grip bent-over row, dumbbell bent-over rows, one-arm dumbbell bent-over rows, bench rows, two-arm barbell rows, one-arm barbell rows, EZ bar bent-over rows, T-bar rows, seated rows, standing one-arm low-pulley rows, machine rows.
Performing rows in a bent-over position allows for greater range of motion, optimizing muscle activation. Perform barbell bent-over rows where the torso is flexed just above parallel to the floor.
Strategically varying your grip (supinated, pronated) can optimize muscle fiber recruitment of the activated muscles. Over time, this will enhance the strength and hypertrophy of the corresponding upper and middle back muscles.
Focus on the concentric portion of the contraction, concentrating on “squeezing” as the scapula are retracted (“shoulder blades” are squeezed together) and elevated (shrugged) as the barbell is lifted.
Focus more on the shoulder extension and scapular retraction to lift the barbell upward as opposed to focusing on the hands dominating the effort of the lift. This will not only optimize muscle activation, but also prevent strain on the biceps brachii that could increase the risk of injury.
Emphasis on eccentric contractions, prolonging the eccentric portion of the contraction, may also be incorporated in a training program focused on increasing strength. This should be implemented accordingly and with adequate muscle recovery as eccentric contractions cause substantial damage to muscle tissue.
It’s important to note that your repetition and set volume will depend on your goals (e.g. strength, hypertrophy, muscular endurance). It is also important to allow adequate recovery days in between back, shoulder, and biceps training days to allow muscles to repair.
Emphasizing the effort of the lift from the hands can increase the risk of injury to the biceps brachii. Focus on lifting the bar with the upper arms and shoulder blades.
Using momentum to lift the bar (e.g. jerking the torso for assistance) minimizes the potential of force production of the involved muscles and can increase the risk for injury. It is important that both the eccentric and concentric phases of the exercise are controlled.
If the lifter has a compromised range of motion with the back or shoulder joint and/or performs this exercise incorrectly, this exercise can increase the risk of injury and/or exacerbate a previous injury.
If proper technique and recovery are not adhered to, impingement syndrome, rotator cuff injuries, biceps tendinitis, biceps tears, and/or lower back injuries may occur.
