Overhead Press Neutral Grip Seated

Start Position
End Position

Starting position:

  1. From a seated position, grasp the two dumbbells with a closed grip.
  2. Place both feet flat on the floor, just wider than shoulder-width apart for optimal stability.
  3. Lift the dumbbells just above shoulder level.
  4. The palms of your hands should be facing inward and elbows should be in front of your body.
  5. Sit straight up, keep torso erect throughout the entire movement.
  6. Position the elbows directly under your fists.
  7. Elbows should be in line with shoulders as the dumbbells are positioned in front of your face.

Upward movement/concentric phase:

  1. Lift the dumbbells upward overhead until elbows near full extension.
Do not lock elbows. Do not touch dumbbells together at the top of the movement. Keep elbows underneath your fists.

Downward movement/eccentric phase:

    1. In a controlled fashion, slowly lower the dumbbells to starting position.
Do not hold your breath. Exhale during the concentric phase and inhale during the eccentric phase.


Exercise Data

  • Primary Muscles: Anterior deltoids
  • Synergists: Triceps brachii, anconeus, pectoralis major, coracobrachialis, trapezius, levator scapulae, serratus anterior, biceps brachii
  • Stabilizers: Wrist flexors and rotator cuff muscles
  • Type: Strength, hypertrophy, muscular endurance
  • Mechanics: Elbow extension, shoulder flexion and upward rotation and elevation of the scapula
  • Equipment: Two dumbbells
  • Lever: 3rd class lever
  • Level: Intermediate to advanced
  • FAQ'S & FACTS ABOUT Overhead Press Neutral Grip Seated

    What Is A Dumbbell Seated Overhead Press With Neutral Grip?

    An overhead dumbbell press is a compound resistance exercise, which targets the middle deltoids. This exercise is performed seated with two dumbbells lifted overhead. The dumbbells are held with a neutral grip.

    The concentric portion of the lift is elbow extension, shoulder flexion and upward rotation and elevation of the scapula as the dumbbells are pressed upward. The eccentric portion is elbow flexion, shoulder extension and scapular depression/downward rotation as the dumbbells are lowered.

    The purpose of the overhead dumbbell press is to strengthen the anterior deltoids while also promoting the hypertrophy (increases in size) of the anterior deltoids.

    Why Do A Dumbbell Seated Overhead Press With Neutral Grip?

    Overhead dumbbell presses provide a variation in the overhead press that stresses the middle deltoids, promoting increases in their size and strength. The neutral grip warrants the elbows to be positioned in front of your body with shoulder flexion and extension. This position activates the anterior deltoids. Activating the anterior deltoids complements overall deltoid aesthetics.

    The dumbbell overhead press is a staple exercise for developing the deltoids. Performing overhead dumbbell presses with a neutral grip may serve as a safer alternative to traditional grip-dumbbell overhead presses and behind-the-head overhead barbell presses and for individuals with a compromised shoulder joint. 

    Performing this exercise in a seated position allows the lifter to further isolate the movement to their upper body.

    Unlike the barbell variation of this exercise, the dumbbells allow the lifter to isolate the contraction of each arm. This may also help determine any weaknesses, if any, as each arm contracts individually.

    In addition to serving as an exercise that enhances the aesthetics of the deltoids, overhead dumbbell presses also complement athletic performance as the lifter’s overhead and pushing mechanics are optimized.

    Anatomy Of A Dumbbell Seated Overhead Press With Neutral Grip

    The deltoid is a thick, multipennate muscle that forms a curtain around the shoulder. It is the primary muscle involved with arm abduction. When developed, the deltoids give the shoulder their round shape. The external rotation and flexion of the shoulder in this exercise causes the elbows to flare out to the sides, activating the middle fibers of the deltoid. The origin of the deltoid is located at the insertion of the trapezius, lateral third of the clavicle and the acromion spine of the scapula. Its insertion is located at the deltoid tuberosity of the humerus.

    The triceps brachii, the primary elbow extensor, is located on the back of the upper arm, originating at the shoulder and inserting in the elbow joint. It consists of three heads, the long, medial and lateral head. The medial head lies beneath the long and lateral head. The long head origin is located at the infraglenoid tubercle of the scapula (shoulder blade). The original of the lateral head is located at the posterior shaft of the humerus. The medial head origin is located at the radial groove of the posterior humeral shaft. The long and lateral heads make up the “horseshoe” portion of the triceps. All three heads merge, sharing insertion into the olecranon process of the ulna, located at the elbow joint.

    The anconeus is a short, triangular muscle located at the elbow joint. It is the triceps brachii’s synergist with elbow extension. Its origin is located at the lateral epicondyle of the humerus, inserting at the lateral aspect of the olecranon process of the ulna.

    The pectoralis major assists the deltoid with shoulder flexion. The pectoralis major originates at the sternal end the clavicle, sternum and rib cartilage (ribs 1-6) with fibers converging at the insertion located at the greater tubercle of the humerus. The coracobrachialis assists the pectoralis major with shoulder flexion. It is a small muscle originating at the coracoid process of the scapula and inserting half way down the shaft of the humerus. The biceps brachii also assists with shoulder flexion during this exercise. The biceps brachii is a weak shoulder flexor, however.

    The trapezius is the most superficial muscle of the posterior thorax. It is a flat and triangular-shaped muscle. The upper fibers of the trapezius elevate the scapula during this exercise. The origin of the trapezius is located at the occipital bone of the posterior skull, the ligamentum nuchae located behind the neck, and at the spines of C7 and all thoracic vertebrae. Its continuous insertion points are located along the acromion and spine of the scapula and lateral third of the clavicle.
The levator scapulae assists the upper fibers of the trapezius with scapular elevation. It is a strap-like muscle deep to the trapezius located at the back and side of the neck. Its origin is located at the transverse processes of C1-C4. Its insertion is located at the medial border of the scapula, superior to the spine.

    The serratus anterior is responsible for upward rotation of the scapula during this exercise, aiding in arm abduction. It is a fan-shaped muscle that lies deep to the scapula. It also runs deep to pectoral muscles on the lateral rib cage. When well-defined, you can see the serrated/sawtooth appearance of this muscle below the axilla. Its origin is located at rib 1 through 8 (sometimes 9) by a series of muscle slips. Its insertion is located at the vertebral border of the scapula, covering the entire anterior surface.

    The wrist flexors and rotator cuff muscles play an essential role in stabilizing the wrists and shoulder joint, respectively, during this exercise.

    Variations Of A Dumbbell Seated Overhead Press With Neutral Grip

    Standing overhead dumbbell press with neutral grip, overhead dumbbell press with traditional grip, overhead barbell press, cable shoulder press, shoulder press machine.

    How To Improve Your Dumbbell Seated Overhead Press With Neutral Grip

    Strategically incorporating exercises that strengthen the wrists and, in particular, the rotator cuff muscles into your training regimen will promote optimal performance and safety with overhead press exercises.

    Focus on the concentric portion of the contraction, concentrating on “squeezing” as dumbbells reach their highest level overhead.

    Emphasis on eccentric contractions, prolonging the eccentric portion of the contraction, may also be incorporated in a training program focused on increasing strength. This should be implemented accordingly and with adequate muscle recovery as eccentric contractions cause substantial damage to muscle tissue.

    It’s important to note that your repetition and set volume will depend on your goals (e.g. strength, hypertrophy, muscular endurance). It is also important to allow adequate recovery days in between triceps and chest training to allow muscles to repair.

    Common Mistakes When Doing Dumbbell Seated Overhead Presses

    Lowering the dumbbells too low and/or starting from a position that is too low can place the shoulder in a compromising position (increasing the risk of injury). Preventing the dumbbells from going too low not only prevents injury, but also optimizes the activation of the deltoids.

    Lowering the weight too quickly not only removes the benefits gained from a controlled eccentric contraction, but also increases the risk of injury. It is important that the concentric and eccentric portions of the lift are controlled.

    Emphasizing the touching of the dumbbells at the top to signify the completion of a repetition is not necessary. Avoiding this common mistake also ensures that you maintain your elbows underneath your fists.

    Injuries Or Ailments & Their Effects Regarding An Overhead Dumbbell Press

    If proper technique is not adhered to the likelihood of injury increases. If the lifter has a compromised range of motion with the shoulder joint, this exercise can increase the risk of injury and/or exacerbate a previous injury. It is also important that the lifter has proper trunk stability to perform this exercise to prevent back or neck injury.

    If proper technique and recovery are not adhered to, impingement syndrome, rotator cuff injuries, and glenoid labrum tears may result. Therefore, it’s best to avoid overhead press exercises when addressing impingement syndrome/rotator cuff injury unless advised by a physical therapist.